Aztecs 5 :: essays research papers

Analysis of an Aztec Encounter   Ã‚  Ã‚  Ã‚  Ã‚  The Spaniard and Aztec civilizations were two completely different worlds whose fated encounter caused some surprising reactions from both parties. Neither of these nations knew exactly what to expect or how to react to each other’s behaviors. Differences in religion, customs and weaponry became the deciding factors of who would be the dominant aggressor in these encounters. Even though both parties were unsure of what to expect, the Spaniards had already set a goal for themselves before they set foot in Mexico. They wanted to conquer the other nation and exploit them for anything of value.   Ã‚  Ã‚  Ã‚  Ã‚  The climax of the Aztec Empire and the conquistadors occurred when Motecuhzoma and Cortes met face to face for the first time. The Spaniards as well as the Aztecs had no clue what to expect. Motecuhzoma told Cortes, “Our lord, you are weary. The journey has tired you, but now you have arrived on earth… to sit on your throne, under its canopy.'; This was due to the fact that the Aztec religion told of a god, Quetzalcoatl, who would come from the heavens and take his place as ruler of the Aztec Empire. Thus Motecuhzoma showered the Spaniards with many fine gifts. Unlike the Spaniards believed, these fine gifts were not really a sign of Aztec submission but rather as a sign of wealth and power. In order to give proper respect to their so-called god, the Aztecs had to show that they were a worthy and powerful nation. The Spaniards took this as a weakness. They thought the Aztecs feared them, which boosted up their confidence level even though they were gre atly outnumbered.   Ã‚  Ã‚  Ã‚  Ã‚  The Spaniards had to communicate with the Aztecs by using La Malinche as an interpreter. She basically made the Aztecs believe that Cortes was a good man and would be cause them no harm. They also had other indigenous people who were allied with the Spanish. The Aztecs must have viewed this as a sign that these strangers would be peaceful since they had others of their kind on the Spaniard’s side. La Malinche translated all that Motecuhzoma had said to Cortes. On page sixty-four of The Broken Spears it says, “Cortes replied in his strange and savage tongue…'; In other passages in the book it depicts the Spaniards as wild and uncivilized. This brings up another point that just as the Spaniards thought of the Aztecs as being barbaric, some Aztecs felt the same way about the Spaniards.

Inner City

1. Financial Ratios— †¢Liquidity Ratio: measure the availability of cash to pay debt. Current Ratio = Current assets/ Current Liabilities 262,515/ 285,030= 0. 92 There is a problem meeting its short term obligations The best way to improve this ratio and better position the business to cover its short-term obligations is to better manage current liabilities (accounts payables).Generate more profit (cash) out of each sale by increasing profit (as long as it is competitive within the industry), reducing costs of goods sold (making the product with less cost or providing services with less costs) or finding efficiencies throughout the operating cycle. †¢Asset Management Ratio: indicate how successfully a company is utilizing its assets to generate revenues. Inventory Turnover= COGS/ Average inventory 1,428,730/ 18,660= 76. 57 Indicate a shortage or inadequate inventory levels, which may lead to a loss in business.Average days to sell the inventory= 365 days/ inventory t urnover ratio 365/ 76. 57= 4. 8 Measure of the number of times inventory is sold or used in a time period (a year). A low turnover rate might point to overstocking, obsolescence, or deficiencies in the product line or marketing effort. On the other hand, a high turnover rate might indicate inadequate inventory levels, which can lead to a loss in business, as the inventory is too low (stock shortages). Receivables Turnover= Sales/ Accounts Receivable 1,784,080/ 242,320= 7. 36 A low ratio implies the company should re-assess its credit policies in order o ensure the timely collection of imparted credit that is not earning interest for the firm. Days Receivable= 365/ Receivables Turnover 365/7. 36= 49. 6= 50 The receivables turnover ratio is used to calculate how well a company is managing their receivables. Total assets turnover= Net Sales Revenue/ Average Total Assets 1,784,080/ 294,565= 6. 06 Measures the efficiency of a Co. use of its assets in generating sales revenue. Companies w ith low profit margins tend to have high asset turnover, while those with high profit margins have low asset turnover. Debt Management Ratio: measure the firm's use of Financial Leverage and ability to avoid financial distress in the long run. The use of debt can improve returns to stockholders in good years and increase their losses in bad years. Debt Ratio= Total Liabilities (Total Debt)/ Total Assets (285,030+ 15,000)/ 294,565= 1. 02 All assets are financed by creditors and some losses are covered by creditors. Indicates the proportion of a company's debt to its total assets. It shows how much the company relies on debt to finance assets. The higher the ratio, the greater the risk associated with the firm's operation.A low debt ratio indicates conservative financing with an opportunity to borrow in the future at no significant risk. †¢Profitability Ratio: represents the % of total sales that Co. retains after incurring the direct costs (variable costs) associated with produc ing the goods sold. Return on Assets= Net Income/ Average Assets 17,610/ 294,565= 5. 98% Indicates that the company is asset heavy. Net Profit Margin= Net Income/ Sales Revenue 17,610/ 1,784,080= 0. 987% A high percentage of each dollar generated by the company in revenue is actual profit Gross Profit Margin= 1,784,080-1,428,730)/ 1,784,080= . 20% Indicates that gross margin isn’t large enough to cover other expenses beyond cost of goods sold. Purpose of margins is to determine the value of incremental sales, and to guide pricing and promotion decision. Understanding and monitoring gross margins can help business owners avoid pricing problems, losing money on sales, and ultimately stay in business. Helps avoid offering prices that are too low or have costs that are too high to ultimately make a profit. 2. Strengths, Weaknesses, Opportunities, and Threats— †¢Strengths: Fast Service/ delivery- supplied paint to contractors within 24 hours, -Steady growth in its mark et, -Competitive price, -Cheap rent/ low overhead costs- gives a competitive advantage, -Cheap employee wages- nonunion organization, -Low production costs- low cost and high quality paint, -Excess capacity †¢Weaknesses: -Unorganized- operating with no management or financial controls, -Lack of consistent and reliable inventory control system, -No customer record (manual count): wastes too much time, -No office space, no billing records, no shipping information -Undesirable ocation and building is in poor condition: old plant, and old equipment (dusty, dirty environment) -No sales personnel, -No computer, no database, -Inexperienced/ unskilled employees, -Lack of delegation and employee empowerment -Narrow product line, -Bad cash flow: insufficient financial resources to fund any changes, -Culture, -Lack of customer confidence: customer perception as a company that negotiates price and unreliable to fill large orders. -Lag between time when they are paying their suppliers and e mployees versus time it takes to collect receivables from customers (30-60 days) †¢Opportunities: Expand product range: go after different segments, -Purchasing a computer to organize data and reduce needless paperwork, -Increase market share by taking large orders, -Hiring professional salesmen to ensure consistent growth and accountants/ consultants to identify problems and solutions: Lower cost of goods sold, lower expenses due to Walsh’s salary, and lower bad debt. †¢Threats: -Market is in slow growth- housing market and overall economy, -High bargaining power of suppliers -High threat of substitutes: larger Co are more reliable Threat of new entrants,low entry barriers in paint manufacturing industry -Rumors that company is in difficult financial straits- unable to pay suppliers and owes a lot for payment on previous taxes, -No audit has been performed= IRS penalties: Wash did not include his income taxes in his income statement; he owes $38,510 in taxes. 3. Re commendations— Within 30 Days: †¢Pay his taxes before he gets audited †¢Collect bad debt from clients †¢Hire personnel to assist in various tasks -Salesmen and accounting managers †¢Grow business and solve current financial problems Within 90 Days: Inner City Paint should keep records of inventory, finances, billing info. -They should invest in a computer and keep all records in a database to automatically calculate changes. †¢Take a cut in high salaries †¢Find and research new suppliers -To be able to provide timely delivery for large orders †¢Minimize COGS Beyond 90 Days: †¢Buy more equipment and trucks †¢Improve management skills and create policies †¢Earn business of larger clients †¢Manage business and growth of the company and to be able to acquire companies in the future that help attaining a larger market share.

Gran Torino Transcultural Analysis Essay

Gran Torino starring Clint Eastwood was about a man’s struggle in adapting to the changes in his environment when confronted by unfamiliar exposure to cultural differences. The film was chosen because it told a story about one’s struggle with traditional practice, cultural diversity, gender roles, and the acceptance of others. In terms of culture, there was an abundance of traditional practices related to the Hmong community. The screenplay was written by Nick Schenk and the movie was filmed in July 2008 (Longwell, T). Gran Torino was directed and produced by Clint Eastwood, who also played the role of the main character known as Walt Kowalski. Walt was an American man and a Korean War veteran who resided in a neighborhood that became inhabited by Hmong families (Gran Torino, 2008). The relationship that Walt had with his own family was disconnected and distant because his sons embraced the modern way of living but Walt was more traditional. Walt was portrayed as a grum py old man who did not like to socialize with others. All of that changed when Walt became associated with the Hmong children next door, Thao and Sue. Walt saved Thao from being taken by the Hmong gang members and was viewed as a hero by the Hmong families despite the fact that Walt was just trying to keep other people off his lawn. Upon an unexpected invitation by Sue, Walt’s world became intertwined with the Hmong community as he was introduced to various traditional Hmong customs and foods. After a series of events, the Hmong gang returned and injured Thao’s family which prompted Walt to seek redemption from his war past by sacrificing himself for the safety of Thao and Sue. The film portrayed culture clashes between an American and Hmong families while focusing on the struggles that Hmong immigrants endure to survive within their community. The Hmong population was great in Minneapolis, Minnesota and it was the original setting of Gran Torino and also the home town of screenplay writer Nick Schenk (Longwell). Schenk had never written any other featured films prior to Gran Torino and it was his first recognized piece. In the early 90s, Schenk worked at a factory where many of his co-workers were Hmong and he gained some knowledge about the history of Hmong people (Longwell). The Hmong sided with the U.S during the Vietnam War but ended up in refugee camps due to communist takeover after the U.S. troops left, which resulted in the Hmong fleeing to the U.S. to escape from the communist forces (Gran  Torino, 2008). Schenk began to incorporate Hmong families into the story with a Korean War veteran to emphasize a clash of cultures. The intended purpose of this film was to express the cultural barriers in the language, customs, and gender roles between Hmong people and Americans. The writers and directors did a great job on portraying masculinity as the perceived dominant role between the characters. In Gran Torino, Walt criticized Thao for doing things that men are not supposed to do such as gardening. Thao does a good job in representing role reversal because he was proud to do women chores like washing the dishes and gardening. Walt tried his best to look after Thao and made Thao masculine by teaching him how to talk to other â€Å"real† men. Walt believed that real American men are supposed to be strong, fight for themselves, pay taxes, and work hard at a hands-on laboring job. Walt eventually helped Thao become a man by getting him a â€Å"real† job, tools for construction work, and social skills to interact with other men. This film was derived from Schenk’s prior experience as a factory worker with other Hmong people and this writer did not create any other significant work subsequent to the production of Gran Torino. The plot of t he movie was to show how two different types of culture collide and interact. In addition, there was also indication that masculinity in males was important as shown by the main character, Walt. The sub-plot was to show the viewers that men are not supposed to be barbaric but to become a sophisticated people with class and follow society’s rule. The main characters were Walt Kowalski, Spider, Thao, and Thao’s older sister, Sue. Walt played the dominating male that represented how a real man should be. Spider, Thao and Sue’s cousin, represented an antagonist barbaric villain that supposed to be a gangster whom terrorized Walt’s neighborhood. Thao played an innocent feminine teenage role that Walt believed was not masculine, but has class and self-respect. Sue played the smart, sophisticated, typical school Asian girl who ended up getting injured by her cousin, Spider, and his gang. It was through the interaction with Sue and Walt that the viewers were able to experience Hmong history and cultural customs. In one of the scenes during a car ride home, Sue explained to Walt the origin of Hmong people and she also invited him to her house for meal where Walt thoroughly enjoyed the foods of Hmong culture. Walt and Spider treated Thao like a child because they both wanted to teach Thao how to become a man. Spid er taught Thao that  he needed to become a barbaric person to become a â€Å"real† man, while Walt taught Thao that hard work and following society norms was what a â€Å"real† man should do. Sue was the only main female character that was able to change Walt’s mind about Hmong people. Because of Sue’s persistence, Walt decided to help her and her family from Spider and his gang. Walt became the protagonist at the end of the movie by risking his own life to bring down Spider and his gang and restoring peace to the community. My opinion about the film was that the director did a good job on portraying masculinity and how a real man should act and treat a woman. There were a lot of racism coming out of Walt’s mouth about Asians, but in the end, I believed he had a change of heart about his Hmong neighbors. I believe he came to realizations that not all Asians are the same as he remembered during his Korean War days. The way Walt finally gave a confession to the priest and how he died for his neighbor was really unexpected. The acting of Walt’s character by Clint Eastwood was really good as well. Walt’s character caught my attention and made me want to know more about his previous life, especially when he talked about how he was in the Kore an War. The cinematography could have been better and at times, it felt like I was watching a biography rather than a movie. One of the flaws was that Walt did not get in a fight for his rude behavior towards everyone that he encountered. Another flaw was that he sacrificed his life for a neighbor when he knew that he could have called the cops on Spider and his crew for possession of a fire arm and shooting his neighbor’s house, rather than choosing death at the end. Also, I believed the movie could have been better if they left out his illness from the doctor’s visit. If they had left that out and continued with the suicidal death in the end rather than risking Walt’s life because of a terminal illness, Walt’s character would have been more heroic. On the contrary, a strength of the movie was when Sue corrected Walt about the pronunciation of her race while giving him a history of where Hmong people came from and why they immigrated to America. The ultimate strength was when Walt died for his neighbor by going to Spider’s apartment complex with witnesses around to see h im get murdered. Throughout the movie, the film showed the audience that Walt always carried a gun to scare off his foes, but at the end, he realized that he did not need a weapon to bring down Spider and his gang. One of the things that I learned from the film was that nurses should not be too quick to judge someone based on appearance, like how Walt called all the Asians â€Å"gooks† without knowing their nationality. In one of the scenes in the movie, Walt was in the waiting room at the hospital for a check-up and a nurse mispronounced his name. The nurse called him â€Å"Koski† while his name was â€Å"Kowalski.† Walt gave her a disgusting look and the nurse did not apologize or asked if she was mispronouncing his name or not. As a future nurse, I want to maintain a professional role and acknowledge patients by their correct name. Correctly pronouncing a patient’s name also eliminates human error and also prevents doctors from diagnosing the wrong person. In conclusion, I would recommend this movie to people who are uneducated about Asian culture. There were a lot of racist terms that Walt used in the movie about Asians and the stereotypes of Asians eating dogs which are not true. I would rate the movie a 4 out of 5 stars because the movie was rich in cultural content and character development. The film is appropriate for audiences ages 13 and up and mainly geared toward mal es. There were a lot of violent content and gang related terms involved. As a result of watching this movie, I learned that one can change if surrounded by the right people under inevitable circumstances such as Walt’s culture clash with his Hmong neighbors. In addition, helping one another was the most rewarding take home message of Gran Torino. Whether I am helping a patient or just lending a helping hand to my next door neighbor, I will remember to be kind as to prevent one another from going down the wrong paths. References Eastwood, C. (Producer & Director). (2008). Gran torino [Motion Picture]. Burbank, CA: Warner Bros. Longwell, T. (2008). Eastwood recognizes Hmong immigrants with new film. Reuters. Retrieved May 27, 2014, from http://www.reuters.com/article/2008/12/09/us-gran-idUSTRE4B81ZC20081209

Chemistry Assignment Essay

Metals are mined from ores, considering yield to see if it is economically viable for a business to mine at a particular site. However, due to environmental damage and global warming, recycling has increased globally to create a sustainable future. By examining the cost and energy expenditure of recycling and extracting aluminium we can understand why recycling is a better choice than extracting metal from its ore. Discuss the importance of predicting yield in the identification, mining and extraction of commercial ore deposits Yield is the amount of product obtained or in mining terms how much (amount) a particular metal can be extracted from an ore (a deposit of minerals in which a commercial metal can be extracted from). Predicting yield in the processes of identification, mining and extraction is vital to the success of a business. For a business to compete with the global markets, the investment must be profitable and in some cases sustainable to last year’s into the future. Percentage composition is used widely in the mining industries to calculate and measure the yield of particular metal from an ore. For example, haematite (Fe2O3), a compound consisting only of iron and oxygen, can theoretically produce around 70% iron while chalcopyrite (CuFeS2), consisting only of copper, iron and sulphur can produce theoretically 35% copper. However if we express yield as a percentage of the ore dug out, an iron ore would only contain about 16% iron and for a copper ore only contain 1-5% copper. This is because an ore dug out of the ground contains unwanted minerals like dirt, rocks and other waste products which add to the mass of the required mineral ;giving a low yield percentage. Since compounds like chalcopyrite and haematite have uniform composition, ores are mixtures of useful minerals and other waste products which have variable composition (different location will yield different amounts of metals). This will affect if it is economical to mine the ore at a particular location and hence demonstrate that predicting yield is important. Predicting yield in the process of mining and extraction is important, whether extracting the metal from the ore or actually mining it, because it can determine if it is profitable or not. Extraction techniques must be efficient and sustainable. Copper is extracted through roasting it with oxygen before smelting it to form liquid copper. It is then reduced by bubbling air into the liquid copper to reduce copper sulphide to copper metal. Since this sulphur dioxide doesn’t escape fast enough, it forms blister copper with is 98% copper. Electrolysis is used to refine it. Due the significant amount of energy required and the cost involved it may seem copper is unprofitable. Yet if the copper price is high, the consumption is high, location is not far from refinery plants and factories that use copper, if there is a steady sustainable source(abundance) of copper ore and the extraction technique is efficient plus cost effective then a profit can be gained from the high cost of extraction, transport and the money needed to pay for the energy consumption. For a copper ore site to be economical it must contain at least 5% of copper or more. Haematite is extracted through reducing it with carbon monoxide to form iron (metal) which falls to the bottom of the blast furnace. Limestone is also heated in the blast furnace which decomposes and reacts with silica to form a slag that floats on the liquid iron, hence stopping iron from reacting with oxygen. High heat is needed to separate iron from oxygen since iron is reactive to oxygen and sand and limestone is needed to prevent the union of these two elements. Hence for haematite to be economically viable an ore must contain at least 20% iron as the energy needed to extract the metal is large and the world’s demand for iron is great. Since iron ore price is relatively high, a profit can be obtained from deposits of iron ore that contain more than 20% of iron. Hence predicting the yield of ore deposits is important to determine if it is profitable to mine. Justify the increased recycling of metals in our society and across the World Recycling is a process that changes waste materials into new products. In recent years, recycling of metals has increased dramatically in Australia and across the world. This is because we are more aware that recycling metals saves money, energy and causes far less pollution compared to extracting metals from ores. This is also spurred on by the fact that our metal ore deposits are depleting (going to run out) if we mine and extract metals at this rate. Hence recycling has been encouraged by organisation like Planet Ark and this has helped spread the message of the benefits of recycling instead of putting money into extracting and mining ores. ‘Reusing and recycling’ metals allow us to conserve these precious commodities so it would be available for the future generation. Demand for metals will increase as new technology will be discovered. Hence recycling is needed to return back old and useless appliance so it can be made it new useful products. Figure 1: It shows froth floatation Note: The vast amount of water used during the process Generally recycling metals use less energy (melting material requires the breaking of weak intermolecular bonds), water and cost less (less energy is needed to break the intermolecular bonds hence the cost will be minimised and new products with recycled material would be cheaper). Energy used in metal extraction comes from coal, oil or gas (as high temperatures are needed to break strong Intramolecular bonds). These fuels are non-renewable and are limited. It also releases large amounts of greenhouse gases when burnt which can cause global warming. Water is used extensively in mining during froth floatation (figure 1). This water can be better spent for human consumption as some countries are experiencing drought and this can cause famine (Africa). Also, harmful chemicals used in the extraction of some metals can seep into the soil and water making it toxic to fauna, flora and humans (figure 1. 1). Figure 1. 1: Acid mine water pollution For example, Bauxite (aluminium ore) is mined near tropical forest. This can cause irreversible damage to the environment as natural vegetation is destroyed, leaving soil bare and subjected to erosion. It can scar the land(figure 2)(removing so much soil and rock that leaves a gigantic hole in the landscape) and since many chemical process need to take place before aluminium is extracted, slag (unwanted metals) are left behind and pollutants are released into the atmosphere adding to global warming. Figure 2: Shows a mine that is extracting metals Note: The extensive invasion of the land and that it is irreversible. But recycling aluminium on the other hand doesn’t scar the land. Little to no pollution occurs and natural vegetation and fauna are not disrupted. Large amounts of rubbish are no produced and water is not needed. For every 1 tonne of aluminium that is recycled, 5 tonne of bauxite is conserved. Metals make up a small percentage of the ore. A large percentage of the ore is the gangue (consisting of dirt, sand and other material) which ends up in landfills. This reduces the space for cities to expand, limiting the number of farms and communities that can be developed and cause overcrowding. Recycling metals doesn’t take up space; hence reduces landfill, as scrap metals are mostly recycled back to make new products. Since ores are non-renewable resources (created by the Big bang and there is no way of returning it to Earth’s crust) it is conserved, reducing the amount of mines opened and environmental impacts that it is associated with. As ores high in metal concentration decrease, the cost of processing ever less pure ores increase. To compensate for the increase in less pure ores, more must be mined. This increases the price of ores making it a valuable resource which is expensive to the consumer. Recycling metals helps to lower the prices of these ores, as the metal is reused without having to mine for new ores. Metals are used worldwide for a variety of purposes from soft drink cans to aircraft bodies. Australia has recycled 63% of aluminium cans; nearly two billion cans a year with a total value estimated to be 33 million dollars. America has recycled in excess of 62. 6 billion cans in the year 2004, worth more than one billion dollars back into the economy. Since recycled aluminium is exported to other countries, Australia benefits as it generate large amounts of money; positively impacting on Australia economy and its benefit flowing into society. However, recycling can only be done if used material is collected from scattered location. The ore on the other hand is confined to one location (the mining site); where factories are often close by to produce products from the freshly extracted metals. But once the product hits the shelves it is scattered across many different countries and throughout communities. It is hard to keep track of all these products as some end up in landfill, waterways or in the people’s backyard. Collecting used material for recycling would cost money as trucks are needed to transport scrap metal to recycling centres. Hence energy (fuel) is needed to operate this machinery. In recent years (figure3), the media has focused on recycling aluminium drink cans because they are widely used and commonly dispersed inappropriately throughout the community. E. g. In waterways, storm drains and in the ocean. Recycling of others metal like iron, steel, copper and lead have always been significant but never reported as it is mainly used at an industrial/commercial level rather than by consumers. However since iron rust, it can be returned to the environment, but aluminium doesn’t corrode (if it does, it forms an oxide layer that actually protects it from further oxidation) it ends up in landfill; taking up space. The only way to ‘get rid of it’ is to recycle it so it can be made into new products. Notice that recycling of lead and ferrous materials have decreased Figure 3: Shows recycling metals Notice that when metals are recycled they can be reused to make different products. Recycling is a sustainable process, saving the environment from pollution, money, conserving natural resources and reduces landfill. Energy is also reduced as recycling requires less energy than extracting a metal from its ore. This will ensure that future generations will be able to enjoy a better standard of living. Analyse information to compare the cost and energy expenditure involved in the extraction of aluminium from its ore and the recycling of aluminium The recycling of aluminium is cost-effective and uses less energy compared to extraction of aluminium from bauxite. To extract bauxite, land must be cleared for mining. Heavy equipment like bulldozers, hydraulic excavators and explosives are used to clear and mine the ore. These equipment cost considerable amount of money and use vast amount of energy (fuel) to operate. Transporting trucks, ships, railway cars are used to transport ores to extracting facilities or shipped to other countries; cost money and again energy (fuel) is needed to power these machines. Notice the size of the person compared to the truck.

Racial Conflicts Essay Example | Topics and Well Written Essays - 1250 words

Racial Conflicts - Essay Example These racial conflicts have brought the societies to a different level, and seem to be rising day by day. With the existence of the racial conflicts, the history has shown how immensely they have affected the world economy and the standard of living. Although it is a global issue, it has been seen that each society has been adversely hit by the problem resulting in the impact on their quality of life. The world is one place which has to be protected and our species given the right to live freely. Unfortunately, due to the value of life, conflicts arise constantly crossing the ideas of religion, social class, and appearances. Although it can be assessed that most of us can live with at least one, but for most of us, it is a critical point (Levine 128). As an effect, the political leaders feel constantly pressurized as to the influence of these racial groups. And thus, while making necessary decisions, they might as well feel partial or biased. Their choices tend to reflect the whole world. This is because control of one country affects the surrounding countries as well and impacts the racial groups throughout the globe, if of the same kind. The other countries thus act as a chain of reactions that may be brought in one country. In many ways, it has been assessed that the racial conflicts are not the result of few, but of many. And it does not only affect one of the aspects but affects the whole globe collectively. These racial conflicts have been affecting the various factors of the globe. On one hand, it affects the psychological growth of the racial group as they have to suffer criticisms, unfairness, and inequality in the society at the hands of the majorities.  Ã‚  

International Systems Corporatin Case Study Example | Topics and Well Written Essays - 1000 words

International Systems Corporatin - Case Study Example The most significant problems that are affecting the plant include, material cost and a bad co-ordination between Research & Development people and Production engineers. Repeated design changing is making the overall cost higher. Had been designs coming from R & D section go directly for production without any more rectification, cost would have lowered. There is a dispute between R & D and Production peoples. One is blaming the other, which forces me to incorporate one special investigation team to govern actually where the conflict is. One design after coming to Production section does not reserves the right to be changed without proper notification to me. According to the notice sent by Employee & Community Relation Manager, we need to hire women and people of color very soon and make sure a higher percentage will be recruited into Production section which requires more effective manpower. Nothing is born perfect. We have to give the color of perfection. Question is not how effective we are, rather question is how much more we have to be. There must be a good relation among the people in the department as well as within various departments. After getting sure that design is complete and may rule over the market then only materials should be purchased. Otherwise it's immaterial to periodically purchase and change the model structure. To set up good relationship, weekly meetings will be organized where all the in- charges of various sections may come with their ambiguities and questions if any. Other than this, picnic party, cultural activities will help the employees to intermingle. As Baker and Baker is interested for our model 80, so production engineers must do their work to make the product available as soon as possible. After that only other models and multi channel digital system will be carried out. As we are hiring people, later on works can be split up. The product whose design is about to complete; before going to production department, requisites must be sent to material management people. If after purchasing any such modification is required, it should be done showing valid cause before me. Finally, instead of maintaining own records department heads are requested to provide necessary information to the finance authority. Response to Robert Strauss We all know that company is running above the projected expenditure for last few months especially due to higher material cost. I have understood the actual reason behind it. It has been decided, next time onwards prior to sending the design to production department, a list of required materials will be given to your department. And also designers/production peoples are not allowed to change the design so easily ensuring proper utilization of the resources purchased. Model 95 will be told to stall for a moment till model 80 gets done. Another discussion I want to make with you regarding the materials that remain unutilized due to the changing of designs. We will check if

Reflection paper Essay Example | Topics and Well Written Essays - 500 words - 19

Reflection paper - Essay Example I read many medical terms while completing this activity. The words or abbreviations were PRN, vaccine, injection, body surface area, means and extremes, milliequivalent , proportion and ratio. These five steps could be used in various problem solving situations, for example they remind you to ask questions when help is needed. They also reminded to do what needs to be done and that I should show initiative and be a team player. Dealing with Medical math this observational serve introduced me to some Pediatric considerations in dealing with medications and where Medical Math is used. Here are some of the various formulas that are used for calculating dosages for children. They are Young’s Rule, Clark’s Rule, Fried’s Rule and Body surface area. I also learned the Five Rules for Medication Administration and they are right dose, right time, right route, right medication, and the right patient. I learned the routes of administration as well and they are enteral, percutaneous, and parenteral. (Christensen, p.395) This assignment of doing an observational serve would be good for a Medical Math course for it gave me practical knowledge and practice using my math skills, for example means and extremes. It also gave me a chance to show what I can do in a Pediatric type office. I found out that I liked working with the children. This observational serve showed me how to use the various problem solving skills in an academic way along with dealing with social issues when I was reading to the children and some of them were afraid and I read a children’s book about visiting the doctor’s